Check if the buzz is consistent across the length of the neck from the open strings to the highest frets closest the body of the instrument. Pick each string without fretting any notes. Fret each string at the first fret and move towards the body noting where the buzz appears and disappears.

If you come across buzz in the strings. You might also be thinking about the buzz that you hear is normal or not. Buzzing in the strings is not normal. Therefore, you need to understand the cause of the buzz and take the necessary steps to get rid of them. Buzz in electric guitar strings can take place due to several reasons. It can be due to a not correct technique, improper setup, or even warn parts.

Picking Or Strumming Too Hard

Cause:
When you pick or strum the notes too hard, your strings may buzz. Most of the people do this as a mistake. As a result, the strings would vibrate at a wider arc. Hence, they will make contact with the frets. That’s where you will hear the buzzing.

Solution:
You need to pick or strum a note with a specific amount of pressure. You should understand the perfect amount of strength that you should give when you are picking or strumming the guitar strings. If you experience the string buzzing and think that you picking or strumming to hard try to lower the force you apply on the strings until you don’t hear the buzz, once you reached that point you can increase to force until you hear the buzzing again and then you need to know what is the maximum amount of force you can apply.

Pressing The Strings Softly

Cause:
When you are pressing the strings, you will need to do that hard enough. Otherwise, you will experience buzzing in the strings. There is a specific amount of pressure that needs to be applied on the string and you should get to know about it as a guitarist. No matter what technique you use, it will not be possible to get positive results, if you don’t press the strings hard enough.

Many times when you experience fret buzz it's a single fret and you don't need to level, crown and dress them all! Too often a luthier will tell you the fret.
The fret is worn out and the fretting is not perfect. At 12th fret, the current action is a little bit less than 1.75mm on the 6th string and 1.5mm on the 1st. But if i adjust the truss rod to make a little bit more bow, there are lots of buzz and sustain loss over 12th fret. The reason why i suspect the saddle is.

Solution:
When you notice the buzzing, you can go ahead and increase the amount of pressure that is being applied by your fingertips on the guitar strings. Sometimes this can deliver a painful experience to you as a beginner. However, you should ignore the pain and keep on practicing unless you feel that it is unbearable then you need to take a break for the day and return tomorrow. Then you will be able to end up identifying the ideal amount of pressure that needs to be applied to the guitar strings to overcome the annoying buzzing.

Attention
if you feel like your fingertips are not strong enough while playing then make sure to check my 11 Easy Tips on How To Toughen Up Your Fingertips

Pressing The String In The Wrong Location

Cause:
like the amount of pressure that is being applied by your fingers on the guitar string, you should also be aware of the correct location of the press. If you don’t follow the correct technique, you will not be able to end up with the best possible results while playing the guitar. Instead, you will hear a buzzing when you play.

Solution:
At the time of pressing the guitar strings to play a note, you should do it directly behind the fret. It is important for the finger to come closer to the fret as much as possible. Otherwise, the note will not be played clearly and you will have to hear the buzzing. With proper practice, you will be able to figure out the correct technique. Once you get hold of the correct technique, you can simply continue with it and overcome buzzing.

Lowering The Guitar Tuning

Cause:
Tuning levels have also been identified as a cause behind the guitar strings buzzing. Most of the players set their guitar to E standard tuning. As a result, their other settings match that tuning, the neck tension, the height of the pickup. Therefore if you change your tuning from E standard to Drop D the other settings will not match up and you may experience the buzzing.

Solution:
If you noticed the buzz in your guitar strings after you changed the tuning, you have two options for this situation. You can adjust the other settings to the new tuning, set up the neck tension and pickup heights and the bridge tension if you have a floating bridge, which I don’t recommend because you probably won’t stay in this tuning for long. The second option is doing nothing, just ignore that buzzing when you playing songs with a lower tuning, they will disappear when you will change the tuning back to E standard.

Changed Strings Thickness

Cause:
According to expert guitarists, the thickness of your guitar string can also be considered as a cause behind buzzing. The thickness of the guitar strings differs. Therefore, you need to figure out the perfect string thickness for your guitar that delivers the optimum level of play to you at the end of the day. I recommend you to go over the other causes and check them first.

Solution:
If you suspect that this may be the cause for you buzzing than I hope that checked the other causes first. First, you need to recall what was the thickness of your last guitar string, and if you see that it differs from the current one you should change it back. If you can’t remember what was the previous thickness you should try searching what is the optimal thickness of strings for your guitar or ask the shop you bought your guitar, the most popular thickness are .010 – .046 and .009 – .042.

I would start with the .009 – .042 thickness first if you are not sure with what to start. I personally use this thickness as the .010 – .046 cased my strings to buzz.

Frets Are Not In Level With Each Other

Cause:
When the frets of the electric guitar are not in level with each other, you will experience string buzzing. This can be considered as one of the most common reasons why strings on an electric guitarist buzz. Therefore, you are encouraged to pay special attention to the fact.

All the frets of your electric guitar should be at the same height. In other words, the frets should be in level with each other. But if you can see that some frets in your guitar are shorter when compared to the others, you may experience string buzzing. That’s mainly because the string will not come physically intact with all the frets. In fact, the strings will not buzz against the lower frets but will buzz when they physically get in touch with the higher frets.

Solution:
To make sure that this doesn’t happen, you need to get the frets in your fretboard into the same height. Then you can make sure that no empty space is left in between the guitar string and the fret to vibrate.

String Action Is Too Low

Cause:
String action of your electric guitar can also be considered as a culprit behind the frustrating buzz that you will experience. String action is the height of your electric guitar when measured at a given fret. The string action would differ from one fret to another. Therefore, you need to focus on the specific fret when you are determining the string action.

Guitarists usually go ahead and take string action measurements on the very first fret, twelfth fret, and the seventeenth fret. However, this depends entirely on your personal preferences. For example, some of the electric guitarists are interested in a high action whereas others are interested in going for a low action, which is also known as slamming.

Buzzing Past 12th Fret Definition

Solution:
When you are setting up the low string action, there is a threshold value that you will need to keep in mind. If you can keep this threshold in mind, you will be able to stay away from the buzzing of the strings. However, it will not be an